Hello,<br><br>The outbound ACL will not work with SuperX and we have been running into issues with SX and SuperX for ACL.  It's a system limitation and you will not get any help either from Brocade TAC.<br><br>Thanks<br>
<br><div class="gmail_quote">On Wed, Sep 16, 2009 at 8:55 PM, Breger, Chris <span dir="ltr"><<a href="mailto:Chris.Breger@cdicorp.com">Chris.Breger@cdicorp.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">







<div>
<font face="Calibri, sans-serif" size="2">
<div>I have a SuperX switch which I am  trying to apply an extended ACL to a routed interface.  When applying the ACL to the interface it only gives me the option of “ip access-group in”  not “ip access-group out”.  Any ideas why I cannot apply the ACL outbound? 
Thanks in advanced!   </div>
<div> </div>
<div> </div>
<div>ip access-list extended wlan</div>
<div> deny ip 172.21.100.0 0.0.0.255 172.16.0.0 0.0.255.255 </div>
<div> deny ip 172.21.100.0 0.0.0.255 172.17.0.0 0.0.255.255 </div>
<div> deny ip 172.21.100.0 0.0.0.255 172.19.0.0 0.0.255.255 </div>
<div> deny ip 172.21.100.0 0.0.0.255 172.23.0.0 0.0.255.255 </div>
<div> permit ip any any </div>
<div> </div>
<div>telnet@PHL17 (config-if-e1000-7/14)#ip access-group wlan ?</div>
<div>  in   Inbound packets</div>
<div> </div>
<div> </div>
<div> </div>
</font>

<br>
______________________________________________________________________<br>
CONFIDENTIALITY NOTICE:  This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain information which is confidential to, and/or privileged in favor of, CDI Corporation or its affiliated companies (CDI) or CDI's customers.  Any review, use, reproduction, disclosure or distribution by the recipient is prohibited without prior written approval from an authorized CDI representative.  This notice must appear in any such authorized reproduction, disclosure or distribution.  If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message and any attachments.  Thank you.<br>

<br>
</div>

<br>_______________________________________________<br>
foundry-nsp mailing list<br>
<a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
<a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br></blockquote></div><br>