Crisis averted. A few more reboots and this thing started to behave. Thanks for your time, everyone.<br><br>--Chuck<br><br><div class="gmail_quote">On Wed, Sep 30, 2009 at 1:17 PM, Chuck Ufarley <span dir="ltr"><<a href="mailto:markentime@gmail.com">markentime@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Didn't even know there was a 5100b. Unfortunately, I tried it and got the same result. Port state BLOCKING. Weirder still, the management port still immediately goes to FORWARDING, even if nothing's connected. Anyone experience that?<br>
<br>I tried downgrading to 4.2.00b, too, both SXS and SXR. Neither worked. Same blocking/forwarding issues. Thanks for the suggestion, though.<br><font color="#888888"><br>--Chuck.</font><div><div></div><div class="h5">
<br><br><div class="gmail_quote">On Wed, Sep 30, 2009 at 1:00 PM, Jared Valentine <span dir="ltr"><<a href="mailto:hidden@xmission.com" target="_blank">hidden@xmission.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">Upgrading to 5.1.00b should fix this problem.
</span></b></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;"> </span></b></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">Closed defects in IronWare R05.1.00b for the
FastIron X Series Switches</span></b></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">106289 Critical Summary</span></b><span style="font-size: 9pt;">: 10 GbE ports may
not link up.</span></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">Symptom</span></b><span style="font-size: 9pt;">: No link on 10 GbE ports</span></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">Probability</span></b><span style="font-size: 9pt;">: Medium</span></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">Feature</span></b><span style="font-size: 9pt;">: System</span></p>
<p><b><span style="font-size: 9pt; font-family: Helvetica-Bold;">Function</span></b><span style="font-size: 9pt;">: System</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Jared Valentine</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a href="mailto:hidden@xmission.com" target="_blank">hidden@xmission.com</a></span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:foundry-nsp-bounces@puck.nether.net" target="_blank">foundry-nsp-bounces@puck.nether.net</a>
[mailto:<a href="mailto:foundry-nsp-bounces@puck.nether.net" target="_blank">foundry-nsp-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Chuck Ufarley<br>
<b>Sent:</b> Wednesday, September 30, 2009 12:58 PM<br>
<b>To:</b> <a href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a><br>
<b>Subject:</b> [f-nsp] Port State Blocking, FastIron SX 800</span></p>
</div><div><div></div><div>
<p> </p>
<p style="margin-bottom: 12pt;">Hi all--<br>
<br>
I've got an FI-SX 800 with a FI-2XGMR4 PREM and a couple of FI-42XGs, and I
can't seem to get the ports on the 2XGs to come up. There's nothing
connected to the box at all. Reloads and power downs keep repeating a
port state BLOCKING. Can't figure out why. Console output is
below. Anyone got any advice?<br>
<br>
FastIron SX 800 Router#sho run<br>
Current configuration:<br>
!<br>
ver 05.1.00T3e3<br>
!<br>
module 1 fi-sx4-2-port-10g-module<br>
module 2 fi-sx4-2-port-10g-module<br>
module 9 fi-sx4-2-10g-port-management-module<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
end<br>
<br>
FastIron SX 800 Router#sho ver<br>
<br>
==========================================================================<br>
Active Management CPU [Slot-9]:<br>
SW: Version 05.1.00T3e3 Copyright (c) 1996-2009 Brocade Communications
Systems<br>
, Inc.<br>
Compiled on May 12 2009 at 22:13:55 labeled as
SXR05100<br>
(3395303 bytes) from Primary SXR05100.bin<br>
BootROM: Version 05.1.00T3e5 (FEv2)<br>
Serial #: SA17085232<br>
HW: Chassis FastIron SX 800-PREM (PROM-TYPE SX-FIL3U)<br>
==========================================================================<br>
SL 1: SX-FI42XG 2-port 10G<br>
Serial #: CH05080069<br>
P-ASIC 0: type 01D1, rev 00 subrev
00<br>
P-ASIC 1: type 01D1, rev 00 subrev
00<br>
==========================================================================<br>
SL 2: SX-FI42XG 2-port 10G<br>
Serial #: CH05080080<br>
P-ASIC 2: type 01D1, rev 00 subrev
00<br>
P-ASIC 3: type 01D1, rev 00 subrev
00<br>
==========================================================================<br>
SL 9: SX-FI2XGMR4 2-port Management<br>
Serial #: CH34070027<br>
P-ASIC 16: type 01D1, rev 00 subrev 00<br>
P-ASIC 17: type 01D1, rev 00 subrev 00<br>
==========================================================================<br>
Active Management Module:<br>
660 MHz Power PC processor 8541 (version 32/0020) 66 MHz bus<br>
512 KB boot flash memory<br>
16384 KB code flash memory<br>
512 MB DRAM<br>
The system uptime is 22 minutes 9 seconds<br>
The system : started=cold start<br>
<br>
FastIron SX 800 Router#sho mod<br>
Module
Status Ports Starting MAC<br>
F1: SX-FISF Switch
Fabric
active<br>
F2: SX-FISF Switch
Fabric
active<br>
S1: SX-FI42XG 2-port
10G
OK 2
0012.f226.d700<br>
S2: SX-FI42XG 2-port
10G
OK 2
0012.f226.d718<br>
S3:<br>
S4:<br>
S5:<br>
S6:<br>
S7:<br>
S8:<br>
S9: SX-FI2XGMR4 2-port
Management
Active 2 0012.f226.d7c0<br>
{ Status : OK }<br>
S10:
Standby 0<br>
FastIron SX 800 Router#sho int e 1/1<br>
10GigabitEthernet1/1 is down, line protocol is down<br>
Hardware is 10GigabitEthernet, address is 0012.f226.d700 (bia
0012.f226.d700)<br>
Configured speed 10Gbit, actual unknown, configured duplex fdx, actual
unknown<br>
<br>
Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING<br>
BPDU guard is Disabled, ROOT protect is Disabled<br>
Link Error Dampening is Disabled<br>
STP configured to ON, priority is level0<br>
Flow Control is enabled<br>
mirror disabled, monitor disabled<br>
Not member of any active trunks<br>
Not member of any configured trunks<br>
No port name<br>
IPG XGMII 96 bits-time<br>
IP MTU 1500 bytes, encapsulation ethernet<br>
300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization<br>
300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization<br>
0 packets input, 0 bytes, 0 no buffer<br>
Received 0 broadcasts, 0 multicasts, 0 unicasts<br>
0 input errors, 0 CRC, 0 frame, 0 ignored<br>
0 runts, 0 giants<br>
0 packets output, 0 bytes, 0 underruns<br>
Transmitted 0 broadcasts, 0 multicasts, 0 unicasts<br>
0 output errors, 0 collisions<br>
Relay Agent Information option: Disabled<br>
FastIron SX 800 Router#sho int e 1/2<br>
10GigabitEthernet1/2 is down, line protocol is down<br>
Hardware is 10GigabitEthernet, address is 0012.f226.d701 (bia 0012.f226.d701)<br>
Configured speed 10Gbit, actual unknown, configured duplex fdx, actual
unknown<br>
<br>
Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING<br>
BPDU guard is Disabled, ROOT protect is Disabled<br>
Link Error Dampening is Disabled<br>
STP configured to ON, priority is level0<br>
Flow Control is enabled<br>
mirror disabled, monitor disabled<br>
Not member of any active trunks<br>
Not member of any configured trunks<br>
No port name<br>
IPG XGMII 96 bits-time<br>
IP MTU 1500 bytes, encapsulation ethernet<br>
300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization<br>
300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization<br>
0 packets input, 0 bytes, 0 no buffer<br>
Received 0 broadcasts, 0 multicasts, 0 unicasts<br>
0 input errors, 0 CRC, 0 frame, 0 ignored<br>
0 runts, 0 giants<br>
0 packets output, 0 bytes, 0 underruns<br>
Transmitted 0 broadcasts, 0 multicasts, 0 unicasts<br>
0 output errors, 0 collisions<br>
Relay Agent Information option: Disabled<br>
FastIron SX 800 Router#<br>
<br>
<br>
As always, your help is greatly appreciated.<br>
<br>
Thanks.<br>
<br>
--Chuck</p>
</div></div></div>
</div>
</blockquote></div><br>
</div></div></blockquote></div><br>