You might also need to set some additional settings.<br><br>The default maximum route cache is too small for a full ipv4 table. Try increasing the following:<br><br>system-max ip-route<br>system-max ip-cache<br><br>The default for ip-route is 102400 with 4.0.1 which is what I am running. So while BGP will handle more, they won't get installed in the routing table unless you increase system-max ip-route. I currently have 314292 routes installed and I believe I have the maximum currently set to 350000<br>
<br>George<br><br><br><br><div class="gmail_quote">On Tue, Feb 16, 2010 at 2:40 PM, Niels Bakker <span dir="ltr"><niels=<a href="mailto:foundry-nsp@bakker.net">foundry-nsp@bakker.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
* <a href="mailto:markentime@gmail.com" target="_blank">markentime@gmail.com</a> (Chuck Ufarley) [Tue 16 Feb 2010, 22:42 CET]:<div class="im"><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Is anyone running a full BGP table on an NI-MLX-MR blade with 2GB RAM (which is max RAM, per the Foundry part list)? Any luck on that? Is it possible?<br>
</blockquote>
<br></div>
It's possible but you'll have to manually select a non-default CAM profile to allow for more routes in the hardware. Default is 262,144 which is not enough for today's Internet full routing table.<br>
<br>
See the "cam-partition" command in the manual, you'll want "ipv4" or "ipv4-ipv6-2" - no VPNs/VRFs then anymore, though.<br>
<br>
<br>
-- Niels.<br><font color="#888888">
<br>
-- <br>
_______________________________________________<br>
foundry-nsp mailing list<br>
<a href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a><br>
<a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
</font></blockquote></div><br>