It is most likely a software problem, try to upgrade the card, then reboot it. It might need the correct mbridge, I have seen this happen before.<br><br>-Nick Jumonville<br><br><div style="visibility: hidden; display: inline;" id="avg_ls_inline_popup">
</div><style type="text/css">#avg_ls_inline_popup { position:absolute; z-index:9999; padding: 0px 0px; margin-left: 0px; margin-top: 0px; width: 240px; overflow: hidden; word-wrap: break-word; color: black; font-size: 10px; text-align: left; line-height: 13px;}</style><div class="gmail_quote">
On Thu, Nov 18, 2010 at 9:00 AM, <span dir="ltr"><<a href="mailto:foundry-nsp-request@puck.nether.net">foundry-nsp-request@puck.nether.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Send foundry-nsp mailing list submissions to<br>
<a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:foundry-nsp-request@puck.nether.net">foundry-nsp-request@puck.nether.net</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:foundry-nsp-owner@puck.nether.net">foundry-nsp-owner@puck.nether.net</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of foundry-nsp digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: New MG8 switch blade BIMG8-10Gx4-v6-A<br>
CARD_STATE_INTERACTIVE (Remco Bressers)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Thu, 18 Nov 2010 16:44:08 +0100<br>
From: Remco Bressers <<a href="mailto:remco@signet.nl">remco@signet.nl</a>><br>
To: <a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
Subject: Re: [f-nsp] New MG8 switch blade BIMG8-10Gx4-v6-A<br>
CARD_STATE_INTERACTIVE<br>
Message-ID: <<a href="mailto:4CE549C8.7060601@signet.nl">4CE549C8.7060601@signet.nl</a>><br>
Content-Type: text/plain; charset=ISO-8859-1<br>
<br>
What happens if you login to the card itself (# rconsole 2) and reboot<br>
the thing? You should see the boot log and reason why the card won't<br>
work. Are the software versions OK?<br>
<br>
<br>
--<br>
Regards,<br>
Signet bv<br>
<br>
<br>
Remco Bressers<br>
<br>
T 040 - 707 4 907<br>
F 040 - 707 4 909<br>
E <a href="mailto:rbressers@signet.nl">rbressers@signet.nl</a><br>
<br>
<br>
<br>
On 11/18/2010 03:49 PM, Dominic Douglas wrote:<br>
> Hi Justin,<br>
><br>
> I saw your problem with the XMR 10G blade, but the problem is harder<br>
> then I expected.<br>
><br>
> Lets go:<br>
><br>
> 1. Removed blade from slot 2.<br>
> 2. Sh mod:<br>
> S2: Configured as BIMG8-10Gx4-v6 4-port 10GbE IPv4/v6 Module<br>
><br>
> Log:<br>
> Nov 18 14:20:17:N:Module was removed from slot 2<br>
><br>
> But the slot is already configured with the right module. I will remove<br>
> the config and reconfigure it:<br>
><br>
> 3. (config)#no mod 2 bimg8-v6-10g-4-port<br>
> 4. (config)#module 2 bimg8-v6-10g-4-port<br>
> 5. Sh mod:<br>
> S2: Configured as BIMG8-10Gx4-v6 4-port 10GbE IPv4/v6 Module<br>
><br>
> 6. Insert module:<br>
><br>
> S2: Invalid Module CARD_STATE_DOWN (7) (previous state =<br>
> CARD_STATE_SW_LOADED)<br>
><br>
> End after the module startup:<br>
><br>
> S2: BIMG8-10Gx4-v6-A 4-port 10GbE IPv4/v6 Module (OACL)<br>
> CARD_STATE_INTERACTIVE 0<br>
><br>
> It might be a bigger problem. This (new) module is an A module:<br>
><br>
> BIMG8-10Gx4-v6-A<br>
><br>
> Our other modules:<br>
><br>
> M1 (upper): BIMG8-MR Management Module Active<br>
> M2 (lower):<br>
> F1: BIMG8-SFM Switch Fabric Module Active<br>
> S1:<br>
> S2: BIMG8-10Gx4-v6-A 4-port 10GbE IPv4/v6 Module (OACL)<br>
> CARD_STATE_INTERACTIVE 0<br>
> S3:<br>
> S4:<br>
> S5:<br>
> S6:<br>
> S7: BIMG8-1Gx40-SFP-v6 40-port 1 GbE IPv4/v6 Module (IPv6+OACL)<br>
> CARD_STATE_UP 40<br>
><br>
><br>
> Extra logging:<br>
><br>
> Nov 18 14:26:07:N:Module 2 is reset by mgmt (reason: boot to interactive<br>
> mode)<br>
> Nov 18 14:25:38:N:Module was inserted to slot 2<br>
> Nov 18 14:20:17:N:Module was removed from slot 2<br>
> Nov 18 13:36:35:N:Module 2 is reset by mgmt (reason: boot to interactive<br>
> mode)<br>
> Nov 18 13:36:10:N:Module 2 is reset by mgmt (reason: CLI command)<br>
> Nov 18 13:24:17:N:Module 2 is reset by mgmt (reason: boot to interactive<br>
> mode)<br>
> Nov 18 13:23:48:N:Module 2 is reset by mgmt (reason: lp sync during booting)<br>
> Nov 18 13:22:19:N:Module was inserted to slot 2<br>
><br>
><br>
> The module is forced to interactive mode by the management. It might be<br>
> a software problem..<br>
><br>
> Kind regards,<br>
><br>
> Dominic<br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
> On Thu, Nov 18, 2010 at 3:17 PM, Justin Suyk - Signet BV<br>
> <<a href="mailto:jsuyk@signet.nl">jsuyk@signet.nl</a> <mailto:<a href="mailto:jsuyk@signet.nl">jsuyk@signet.nl</a>>> wrote:<br>
><br>
> Hi,<br>
><br>
> We had to remove the blade before changing the config.<br>
> So :<br>
><br>
> 1. remove module<br>
> 2. remove the blade config (no module ... bi-...)<br>
> 3. config the blade<br>
> 4. insert the blade<br>
> 5. get a beer<br>
><br>
><br>
> Regards,<br>
> Signet bv<br>
><br>
><br>
> Justin Suyk<br>
><br>
> T 040 - 707 4 907<br>
> F 040 - 707 4 909<br>
> Kvk 17089930<br>
><br>
><br>
><br>
> On 11/18/2010 03:11 PM, Dominic Douglas wrote:<br>
>><br>
>> *Hi All,<br>
>><br>
>> We do have a problem with one of our MG8 switches. We've added a<br>
>> new BIMG8-10Gx4-v6-A blade, but after configuration the blade will<br>
>> not recover from CARD_STATE_INTERACTIVE.<br>
>><br>
>> S2: BIMG8-10Gx4-v6-A 4-port 10GbE IPv4/v6 Module (OACL)<br>
>> CARD_STATE_INTERACTIVE 0 000c.db27.4560<br>
>><br>
>> Steps taken:<br>
>><br>
>> 1. Reset module.<br>
>> 2. Set type to the slot port.<br>
>> 3. Turn on/off module.<br>
>><br>
>> Unfortunately we can't find any logs about the new blade, only the<br>
>> current state: **CARD_STATE_INTERACTIVE.<br>
>><br>
>> Kind regards,<br>
>><br>
>> Dominic<br>
>> **<br>
>><br>
>> *<br>
>><br>
>><br>
>> _______________________________________________<br>
>> foundry-nsp mailing list<br>
>> <a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a> <mailto:<a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a>><br>
>> <a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
><br>
><br>
><br>
><br>
> _______________________________________________<br>
> foundry-nsp mailing list<br>
> <a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
> <a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
<br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
foundry-nsp mailing list<br>
<a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
<a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
<br>
End of foundry-nsp Digest, Vol 94, Issue 10<br>
*******************************************<br>
</blockquote></div><br>