<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Shameless bump.<br>
When I try to trunk the lacp ports, I get an error:<br>
<br>
trunk ethernet 3/3 to 3/4<br>
error - trunk ports contain LACP-enabled ports.<br>
<br>
<br>
<br>
Here's the relevant part of the config:<br>
<br>
interface ethernet 3/3<br>
mtu 9000<br>
link-aggregate configure key 10000<br>
link-aggregate active<br>
!<br>
interface ethernet 3/4<br>
link-aggregate configure key 10000<br>
link-aggregate active<br>
!<br>
<br>
<br>
<br>
<br>
show link-ag:<br>
System ID: 000c.dba5.e840<br>
Long timeout: 90, default: 90<br>
Short timeout: 3, default: 3<br>
Port [Sys P] [Port P] [ Key ]
[Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]<br>
3/3 1 1 10000 Yes L Agg Syn Col Dis No
No Ope<br>
3/4 1 1 10000 Yes L Agg Syn Col Dis No
No Ope<br>
<br>
<br>
<br>
<br>
<br>
show trunk:<br>
Configured trunks:<br>
<br>
Trunk ID: 66<br>
Type: Switch<br>
Ports_Configured: 2<br>
Primary Port Monitored: Jointly<br>
<br>
Ports 3/3 3/4 <br>
Port Names none none <br>
Port_Status enable enable <br>
Monitor off off <br>
Mirror Port N/A N/A <br>
Monitor Dir N/A N/A <br>
<br>
Operational trunks:<br>
<br>
Trunk ID: 66<br>
Type: Switch<br>
Duplex: Full<br>
Speed: 1G<br>
Tag: No<br>
Priority: level0<br>
Active Ports: 2 <br>
<br>
<br>
Ports 3/3 3/4 <br>
Link_Status active active <br>
LACP_Status ready ready <br>
Load Sharing<br>
Mac Address 6 5 <br>
IP 0 0 <br>
IPX 0 0 <br>
Apple Talk 0 0 <br>
Multicast 0 0 <br>
<br>
<br>
<br>
On 04/12/2012 07:16 PM, Edward Rosinzonsky wrote:
<blockquote cite="mid:4F878C76.7050609@entetel.com" type="cite">
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
Hi,<br>
<br>
I'm trying to setup LAG between my si350 and the cisco switch. I
set up the LAG without problems, but all traffic just defaults to
the first port in the LAG. <br>
<br>
On the cisco, I solve this problem with the following command:<br>
<i>port-channel load-balance src-dst-ip</i><br>
<br>
But, I can't find anything similar for the foundry. Anyone know
how to do this?<br>
<br>
Thanks.<br>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
foundry-nsp mailing list
<a class="moz-txt-link-abbreviated" href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="http://puck.nether.net/mailman/listinfo/foundry-nsp">http://puck.nether.net/mailman/listinfo/foundry-nsp</a></pre>
</blockquote>
<br>
</body>
</html>