Hello Community,<br><br>I have an MLXe-4 (IronWare : Version 5.3.0cT163) with two MR2-X modules that experienced an MR switchover for no apparent reason :<br><br>SSH@er01.par02#sh module <br>        Module                             Status      Ports  Starting MAC<br>
M1 (left): BR-MLX-MR2-X Management Module     Standby (Ready State)<br>M2 (right): BR-MLX-MR2-X Management Module     Active<br><br><br>SSH@XX.XXX#sh redundancy <br><br>=== MP Redundancy Settings ===<br>Default Active Slot = M1 (left)<br>
Running-Config Sync Period = 7 seconds<br><br>=== MP Redundancy Statistics ===<br><br>Current Active Session:<br>Active Slot = M2 (right), Standby Slot = M1 (left) (Ready State), Switchover Cause = No Switchover<br>Start Time = 00:17:45 GMT+00 Thu Sep 20 2012<br>
<br><br>Previous Active Session #1:<br>Active Slot = M1 (left), Standby Slot = M2 (right), Switchover Cause = Active Rebooted<br>Start Time = 09:43:52 GMT+00 Fri Sep 14 2012<br>, End Time = 00:17:45 GMT+00 Thu Sep 20 2012<br>
<br><br>This was confirmed by logs :<br><br>Sep 20 00:17:59:A:System: Management module at slot M2 state changed from standby to active due to Active reboot<br><br><br>I opened a ticket with Brocade support but wanted to know if anyone experienced the same problem out there ?<br>
<br>Trying to understand here as the given reason doesn't give any kind of a clue. <br><br>Regards.<br clear="all"><br>-- <br>Youssef BENGELLOUN-ZAHR<br><br>