<font face="trebuchet ms, sans-serif"><a href="http://www.brocade.com/downloads/documents/html_product_manuals/NI_05400a_CFG/CAM_part.82.2.html">http://www.brocade.com/downloads/documents/html_product_manuals/NI_05400a_CFG/CAM_part.82.2.html</a> </font><br>

<br><div class="gmail_quote">2012/10/3 Darren O'Connor <span dir="ltr"><<a href="mailto:darrenoc@outlook.com" target="_blank">darrenoc@outlook.com</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">




<div><div dir="ltr">Greg.<br><br>Out of interest, what will my XMR hold for both? I've been told 1 million IPv4. so if I wanted to split this into IPv4 and IPv6 does that give me 750K IPv4 and 62.5K IPv6?<br><br>Thanks<br>

<br><div><div></div>> Date: Wed, 3 Oct 2012 12:50:23 -0400<br>> From: <a href="mailto:ghankins@mindspring.com" target="_blank">ghankins@mindspring.com</a><br>> To: <a href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a><br>

> Subject: Re: [f-nsp] CER FIB capacity<br>> <br>> Hi Rob, the CER routers use SRAM for the IPv4/v6 FIB instead of CAM, so<br>> for the CES/CER/CER-RT platforms the scalability is dynamic for all IP<br>> routes in the FIB (vs the MLX CAM architecture where we have to choose<br>

> fixed partition sizes which can support a maximum number).<br>> <br>> Scalability depends on how the memory is used by IPv4 and IPv6 routes.<br>> There is no easy formula to calculate the utilization, so we have tested<br>

> certain combinations which are officially supported maximums.  While a<br>> different number of routes might work, it will not be a supported or<br>> tested combination.<br>> <br>> For CER:<br>> 256K IPv4 routes + 128K IPv6<br>

> 448K IPv4 + 64K IPv6<br>> 512K IPv4 + 0 IPv6<br>> <br>> For CER-RT:<br>> 1.5M IPv4 + 512K IPv6<br>> <br>> "Internet route mix" is used to indicate that we are using a mix of prefix<br>> lengths.  No compression is being used.<br>

> <br>> Greg<br>> (works for Brocade)<br>> <br>> -- <br>> Greg Hankins <<a href="mailto:ghankins@mindspring.com" target="_blank">ghankins@mindspring.com</a>><br>> <br>> -----Original Message-----<br>

> Date: Wed, 3 Oct 2012 16:54:45 +0200<br>> From: Robert Hass <<a href="mailto:robhass@gmail.com" target="_blank">robhass@gmail.com</a>><br>> To: <a href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a><br>

> Subject: [f-nsp] CER FIB capacity<br>> <br>> Hi<br>> I know that CER (non-RT version) have FIB for 512K IPv4 / 128K IPv6.<br>> My question is CAM is split between IPv4 and IPv6 - I mean if I have<br>> 128K IPv6 routes in FIB then I cannot have 512K IPv4 routes at same<br>

> time.<br>> <br>> Rob<br>> _______________________________________________<br>> foundry-nsp mailing list<br>> <a href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a><br>

> <a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>> _______________________________________________<br>> foundry-nsp mailing list<br>

> <a href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a><br>> <a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>

</div>                                      </div></div>
<br>_______________________________________________<br>
foundry-nsp mailing list<br>
<a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
<a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br></blockquote></div><br>