Greetings!<div><br></div><div>I am having a little bit of trouble finding information about ipv6 layer 3 functions on the FESX448-PREM.</div><div><br></div><div>It seems that there is a very basic IPv6 function included in my current software image. Does anyone have any additional information on how to enable IPv6 OSPF support on this router?</div>
<div><br></div><div><div>#show version</div><div> SW: Version 04.3.00T3e3 Copyright (c) 1996-2008 Foundry Networks, Inc.</div><div> Compiled on Nov 14 2008 at 15:23:55 labeled as SXR04300</div><div> (3162252 bytes) from Primary SXR04300.bin</div>
<div> BootROM: Version 04.0.00T3e5 (FEv2)</div><div> HW: Stackable FESX448+2XG-PREM (PROM-TYPE FESX448-L3U)</div><div>==========================================================================</div><div> Serial #: FL37051814</div>
<div> P-ASIC 0: type 00D1, rev D1 subrev 00</div><div> P-ASIC 1: type 00D1, rev D1 subrev 00</div><div> P-ASIC 2: type 00D1, rev D2 subrev 00</div><div> P-ASIC 3: type 00D1, rev D2 subrev 00</div>
<div> P-ASIC 4: type 01D1, rev 00 subrev 00</div><div> P-ASIC 5: type 01D1, rev 00 subrev 00</div><div>==========================================================================</div><div> 300 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus</div>
<div> 512 KB boot flash memory</div><div>16384 KB code flash memory</div><div> 128 MB DRAM</div><div><br></div><div><div>telnet@----(config-if-e10000-50)#ipv6</div><div> ipv6 IPv6 parameters</div>
<div> ipv6-multicast-disable Disable IPv6 PIM and vlan MLD snooping on this</div><div> port</div><div>telnet@----(config-if-e10000-50)#ipv6</div><div> address Assign IPv6 address to this interface</div>
<div> enable Enable IPv6 on this interface</div></div><div><br></div></div><div><br></div><div>If anyone has any information, please let me know.</div><div><br></div><div>Thanks!</div><div><br></div><div>Nick</div>