<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><i>#reload-check<br>Checking for coherence...<br>Done.</i><br><br>Reload-check is fine. <br><br>The
line card is showing the right code version. The only difference is
that this card was put into this system at a later date. Before the card
was put into the system I had upgraded the card itself to the right
code version in another XMR.<br><br>How do I check the boot log of a line card? It would be good to look at that.<br><br><br><br><br><div>> Date: Wed, 24 Jul 2013 12:01:52 +0200<br>> From: erich@hoh.ch<br>> To: darrenoc@outlook.com<br>> Subject: Re: [f-nsp] XMR LP running out of RAM<br>> <br>> Hi,<br>> <br>> This sounds strange to me too. I guess you allready did a<br>> 'reload-check'. Could you do a 'show version' to check the versions on<br>> the LP cards (hardware and software). Cause I had once some strange<br>> issues after I upgraded a linecard directly from 2.4 -> 5.1.<br>> <br>> LP1 (the one which is affected) and LP2 (the one which is ok)<br>> <br>> Next thing what you can do is boot the lp in interactive mode an look<br>> into the boot process if you see something weired (missmatch of monitor<br>> or boot code).<br>> <br>> Regards<br>> Erich<br></div> </div></body>
</html>