<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Sorry,</div><div><br></div><div>I can't as my clients end feed points are tagged.</div><div><br></div><div>Just want to know if what I'm proposing is right ?</div><div><br></div><div>Best regards.<br><br><br></div><div><br>Le 2 oct. 2014 à 20:35, "<a href="http://i3D.net">i3D.net</a> - Martijn Schmidt" <<a href="mailto:martijnschmidt@i3d.net">martijnschmidt@i3d.net</a>> a écrit :<br><br></div><blockquote type="cite"><div>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
Youssef,<br>
<br>
Can't you specify an untagged VPLS end-point for the customer-facing
port, and then supplement it with the tag-type 9100? This is the way
you'd do it on a VLL, it makes sense to have it work that way on
VPLS too. Copying from the manual:<br>
<br>
<big><big>Specifying an untagged endpoint</big></big><br>
<br>
To specify an untagged endpoint for a VPLS instance, enter commands
such as the following.<br>
<br>
<font face="Courier New, Courier, monospace">Brocade(config-mpls)#
vpls v1 40000<br>
Brocade(config-mpls-vpls-v1)# vlan 100<br>
Brocade(config-mpls-vpls-v1-vlan-100)# untagged ethernet 2/1</font><br>
<br>
<b>Syntax: [no] untagged [ethernet] portnum</b><br>
<br>
NOTE<br>
Foundry Discovery Protocol (FDP) must not be enabled on an untagged
VPLS or VLL endpoint.<br>
<br>
Best regards,<br>
Martijn<br>
<br>
<div class="moz-cite-prefix">On 10/02/2014 08:23 PM, Youssef
Bengelloun-Zahr wrote:<br>
</div>
<blockquote cite="mid:CALHo_yDuyWzyfLmQ1dhSufQJprb94YH2D5x=bFkw0Xjw4vrs=w@mail.gmail.com" type="cite">
<div dir="ltr">
<div>
<div>
<div>Dear Martijn,<br>
<br>
</div>
Thank you for your feedback but I'm trying to achieve the
other way around ie strip Provider's outer VLAN.<br>
<br>
We do agree on the fact that provider-facing port has to be
declared as expecting QinQ frames :<br>
<br>
tag-type 9100 ethe X/Y.<br>
<br>
</div>
Then, I have to "strip out" outer-VLAN and declare my end
clients 802.1Q VLANs in their VPLS instances :<br>
<br>
<div><a moz-do-not-send="true" name="148cb2da0b402206_1084050">Brocade(config-mpls)#vpls
test 10</a></div>
<div><a moz-do-not-send="true" name="148cb2da0b402206_1084054">Brocade(config-mpls-vpls-test10)#vlan
X inner-vlan Y</a></div>
<div><a moz-do-not-send="true" name="148cb2da0b402206_1084058">Brocade(config-mpls-vpls-test_10-vlan-X-inner-vlan-Y)#tagged
Ethernet 2/1</a></div>
<br>
X being SP transport VLAN (outer VLAN) and Y being clustomer
VLAN (inner VLAN).<br>
<br>
</div>
I am correct ?<br>
<br>
Thanks.<br>
<div>
<div><br>
<br>
<div class="gmail_extra"><br>
<div class="gmail_quote">2014-10-02 18:32 GMT+02:00
<a href="http://i3D.net">i3D.net</a> - Martijn Schmidt <span dir="ltr"><<a moz-do-not-send="true" href="mailto:martijnschmidt@i3d.net" target="_blank">martijnschmidt@i3d.net</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0px 0px
0px 0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> Hello Youssef,<br>
<br>
It looks something like the below for MPLS VLL, I
haven't experimented with VPLS yet but suspect you'd
have to terminate as untagged as well:<br>
<br>
tag-type 9100 ethe 7/2<br>
<br>
vll MODERATED 3003<br>
vll-peer A.B.C.D<br>
untag e 7/2<br>
<br>
SSH@MODERATED#show vlan e 7/2<br>
VLL name MODERATED, VLL
ID: 3003, VLAN: 1 Untagged<br>
<br>
Best regards,<br>
Martijn
<div>
<div class="h5"><br>
<br>
<div>On 10/02/2014 05:37 PM, Youssef
Bengelloun-Zahr wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>
<div>Hello Martijn,<br>
<br>
</div>
Would care to share some configuration
example please ?<br>
<br>
</div>
Best regards.<br>
<br>
<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">2014-10-02 17:25
GMT+02:00 <a href="http://i3D.net">i3D.net</a> - Martijn Schmidt <span dir="ltr"><<a moz-do-not-send="true" href="mailto:martijnschmidt@i3d.net" target="_blank">martijnschmidt@i3d.net</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
Youssef,<br>
<br>
In our experience with QinQ over MPLS
VLL, not VPLS, you'll want to make the
customer-facing MPLS port untagged.<br>
<br>
QinQ will then encapsulate the whole
thing, dump it into the VLL as a
single "instance/VLAN", and <random
device> on the other side of the
line can unpack it again.<br>
<br>
Best regards,<br>
Martijn
<div>
<div><br>
<br>
<div>On 10/02/2014 05:15 PM,
Youssef Bengelloun-Zahr wrote:<br>
</div>
</div>
</div>
<blockquote type="cite">
<div>
<div>
<div dir="ltr">
<div>Hello,<br>
<br>
Anyone ?<br>
<br>
</div>
Y.<br>
<div class="gmail_extra"><br>
<br>
<br>
<div class="gmail_quote">2014-10-01
12:07 GMT+02:00 Youssef
Bengelloun-Zahr <span dir="ltr"><<a moz-do-not-send="true" href="mailto:youssef@720.fr" target="_blank">youssef@720.fr</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0px 0px
0px
0.8ex;border-left:1px
solid
rgb(204,204,204);padding-left:1ex">
<div dir="ltr">
<div>
<div>
<div>
<div>
<div>Dear
Community,<br>
<br>
</div>
A provider of
ours is
handing off
clients VLANs
over a fiber
interco using
QinQ (outer
VLAN is for
transport on
their network
and inner VLAN
is our end
client).<br>
<br>
</div>
We actually
terminate this
on a Cisco ME
but would like
to move that to
an MLXe action
as MPLS PE and
map VLANs into
different MPLS
instances.<br>
<br>
</div>
I wanted to
confirm the exact
stanza based on
what I found in
NI5.4 config guide
:<br>
<br>
</div>
1/ Activate QinQ on
the provider facing
port :<br>
<br>
tag-type 9100 ethe
X/Y.<br>
<br>
</div>
<div>I found this
section in the guide
related to this :<br>
<br>
<div><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084042">"<i>Special
considerations
for
dual-tagged
endpoints</i></a></div>
<i> </i>
<div><i><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084043">Before
configuring a
dual-tagged
VPLS endpoint,
consider the
following:</a></i></div>
<i> </i>
<div style="margin-left:0pt">
<table summary="" border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr style="vertical-align:baseline">
<td>
<div style="width:18pt;white-space:nowrap">
<i><span>• </span></i>
</div>
</td>
<td width="100%">
<div><i><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084044">The
tag protocol
identifier
(TPID) of the
inner VLAN tag
must be 0x8100
be classified
as dual-tagged
and recognized
by dual-tagged
endpoints. If
the TPID is
not 0x8100,
the packet
will be
classified as
a
single-tagged
packet.</a></i></div>
</td>
</tr>
</tbody>
</table>
</div>
<i> </i><i> </i>
<table summary="" border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr style="vertical-align:baseline">
<td>
<div style="width:18pt;white-space:nowrap">
<i><span>• </span></i>
</div>
</td>
<td width="100%"><i>
</i>
<div><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084045"><i>The
TPI</i>D of
the outer VLAN
tag must be
the port’s
configured tag
type (the
default tag
type is
0x8100)."</a></div>
</td>
</tr>
</tbody>
</table>
<br>
<br>
</div>
2/ Map client VLAN
into the different
VPLS instances :<br>
<br>
<div><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084050">Brocade(config-mpls)#vpls
test 10</a></div>
<div><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084054">Brocade(config-mpls-vpls-test10)#vlan
X inner-vlan Y</a></div>
<div><a moz-do-not-send="true" name="148d1b487366bf18_148d17677fb5b28d_148cb2da0b402206_1084058">Brocade(config-mpls-vpls-test_10-vlan-X-inner-vlan-Y)#tagged
Ethernet 2/1</a></div>
<br>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>X being
SP transport
VLAN (outer
VLAN) and Y
being
clustomer VLAN
(inner VLAN).<br>
<br>
<br>
</div>
<div>Does that
sound about
right to you ?<br>
<br>
</div>
<div>Thanks
for the
feedbacks.<br>
<br>
</div>
<div>Best
regards.<span><font color="#888888"><br clear="all">
</font></span></div>
<span><font color="#888888">
<div>
<div>
<div>
<div><br>
<br>
<br>
-- <br>
Youssef
BENGELLOUN-ZAHR<br>
</div>
</div>
</div>
</div>
</font></span></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
Youssef BENGELLOUN-ZAHR<br>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
</div>
</div>
<pre>_______________________________________________
foundry-nsp mailing list
<a moz-do-not-send="true" href="mailto:foundry-nsp@puck.nether.net" target="_blank">foundry-nsp@puck.nether.net</a>
<a moz-do-not-send="true" href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a></pre>
</blockquote>
<br>
<br>
<br>
<font face="arial">Best regards,<br>
<br>
Martijn Schmidt<br>
<font color="000000"><a moz-do-not-send="true" href="http://www.i3D.net" target="_blank">http://www.i3D.net</a></font>
<br>
<br>
<mime-attachment.jpg><a href="http://i3D.net">i3D.net</a> is a private
company registered in The
Netherlands at Meent 93b, Rotterdam.
Registration #: 14074337 - VAT # NL
8202.63.886.B01. <a href="http://i3D.net">i3D.net</a> is CDSA
certified on Content Protection and
Security and provides hosting from
16 global ISO-certified datacenters.
We are ranked in the Deloitte
Technology Fast 500 EMEA as one of
the fastest growing technology
companies. <br>
</font><br>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
Youssef BENGELLOUN-ZAHR<br>
</div>
</blockquote>
<br>
<br>
<br>
<font face="arial">Best regards,<br>
<br>
Martijn Schmidt<br>
<font color="000000"><a moz-do-not-send="true" href="http://www.i3D.net" target="_blank">http://www.i3D.net</a></font>
<br>
<br>
<mime-attachment.jpg><a href="http://i3D.net">i3D.net</a>
is a private company registered in The
Netherlands at Meent 93b, Rotterdam.
Registration #: 14074337 - VAT # NL
8202.63.886.B01. <a href="http://i3D.net">i3D.net</a> is CDSA certified on
Content Protection and Security and provides
hosting from 16 global ISO-certified
datacenters. We are ranked in the Deloitte
Technology Fast 500 EMEA as one of the fastest
growing technology companies. <br>
</font><br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
Youssef BENGELLOUN-ZAHR<br>
</div>
</div>
</div>
</div>
</blockquote>
<br>
<br>
<br>
<font face="arial" size="2">Best regards,<br><br>Martijn Schmidt<br><font color="000000"><a href="http://www.i3D.net">http://www.i3D.net</a></font> <br><br><5b9cf835.8e7c0883.jpg><a href="http://i3D.net">i3D.net</a> is a private company registered in The Netherlands at Meent 93b, Rotterdam. Registration #: 14074337 - VAT # NL 8202.63.886.B01. <a href="http://i3D.net">i3D.net</a> is CDSA certified on Content Protection and Security and provides hosting from 16 global ISO-certified datacenters. We are ranked in the Deloitte Technology Fast 500 EMEA as one of the fastest growing technology companies. <br></font><br>
</div></blockquote></body></html>