<div><div><div><div>Hello List</div><div> </div><div>LP CPU is stuck at 96-100% when receiving traffic over a configured GRE tunnel</div><div> </div><div>MLX-4</div><div>NI-MLX-10Gx4</div><div> </div><div>Debug packet capture shows many of these</div><div> </div><div><div><div>[ppcr_tx_packet] ACTION: Drop packet(reason: Layer 3 invalid FID(PFE))</div><div>[ppcr_rx_packet]: Packet received</div><div>Time stamp : 188 day(s) 12h 45m 15s:,</div><div>TM Header: [ <span>8016 1000 0000</span> ]</div><div>Type: Fabric Unicast(0x<span>00000008</span>) Size: 88 Parity: 1 Src IF: 0</div><div>Src Fap: 0 Dest Port: 0  Src Type: 0 Class: 0x<span>00000000</span></div><div>**********************************************************************</div><div>Packet size: 82, XPP reason code: 0x<span>00006868</span></div><div>FID     = 0x0001</div><div>  Offset  = 0x10</div><div>  VLAN    = 100(0x0064)</div><div>  CAM     = 0x135ad(R)</div><div>  SFLOW   = 0</div><div>  DBL TAG = 0</div> <div>Pri CPU MON SRC   PType US BRD DAV SAV DPV SV ER TXA SAS Tag MVID</div><div>0   1   0   1/1   0     1  0   0   0   1   0  0  1   1   1   0</div></div></div><div> </div><div>The issue only occurs when traffic is sent over the GRE tunnel otherwise CPU is 1 - 2 %</div><div> </div><div>Management CPU is low all the time, LP is the only problematic</div><div> </div><div>Show tasks indicates LP-RX-Pak is 96% : main is 2%</div><div> </div><div>No route-only mode is enabled on this chassis.</div><div> </div><div>Cheers</div></div></div></div>