RCA Plug

[Keith Rowland]

Ray:  These are lousy RF connectors.  Use 'em where space in the Heath
gear won't allow anything else, or for low-level RF if you must, but for
the output connector, I'd put in an SO-239 so you can use PL-259
connectors.  (I'm referring to the RF output...the antenna connection.)
Even if it means drilling a hole, as I have done in a very neat place on
my SB-104As where it looks like it was designed that way, I would put in
an SO-239 for the hi-level RF connectors.

73, Keith



Ray Gustafson wrote:
>
> Hi
> Anybody know where to get the RCA male plug like Heath supplied
> with there kits to solder on interconect cables etc, Looked at the one's
>
> at Radio Shack etc, but don't like them.
>
>                                                    Thanks  73  Ray
> WB0HHM
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --