AT-1

[Wayne Alexander]

I have a AT-1 that someone has converted to 30m. I want to put it back to
factory. Does is anyone know what the grid current should be on 40m? I have
had to rewind the 40m amplifier coil in it. I hope I have done it
correctly. I was getting about 10 watts out and about 5 to 10 mils on the
grid. If anyone knows the correct number of turns of the amplifier coil and
the oscillator coil I would like to know. The 10-15,20,80 coils in the
amplifier side are ok. If I looked at the schematic correctly the
oscillator coil is one solid wire with no breaks. Hope you guys can help me
out. I would love to get this thing up and running. Thanks in advance.

KB0PTE
Wayne

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --