Typo found in manual? and other questions

[Aaron Hayden]

Howdy ppl,

I was just reading through the 0-5 oscilloscope manual that Mr. Trent has
so graciuosly sent me and may have found a typo.  It's in step 6 of the
assembly section, second sentence. "A wire to pin #7 on the 6SN7 tube
socket and to pin #2 on the first horizontal 6SN7 tube socket."

Shouldn't this read as follows.. "A wire to pin #7 on the 6SN7 tube socket
and to pin #2 on the first horizontal 6SH7 tube socket."  ?????????
I know this may be getting picky, but typos, even the little ones, can send
a person to the looney bin trying to figure out what's going on.  Anyone w/
experience w/ this manual please give me your input on this. Also, can
someone tell me the differences between a 6SH7 tube and a 6SJ7 tube? I am
dealing w/ a 0-3 sillyscope and using a 0-5 manual.  I was wondering how
they differ and can I wire a 6SJ7 as if it was a 6SH7? One more thing, the
manual calls out for 'condensers'. I assume these are capacitors, just an
old term.  I also asume I can replace these with Electrolytic? Thanks in
advance..

Aaron

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --