Power Supplies Needed ...plus...some questions for the Heathens

[Keith Rowland]

Doug:  The SB-200 weighs 41 Pounds.

       It came either with 572B or T160L tubes.

       Can't help about the paint or the HP-23, but hope the above data
will help you.

73, Keith



J.Douglas Hensley wrote:
>
> Good Morning to keepers of the Green,
>
> Has anyone an HP-23A power supply for sale or trade?  Needing to power an
> HW-101.  Still seeking the KS-1 p.s. for Heath's KL-1.
>
> Also have some question for anyone awake here.  What is the approximate
> weight of the SB-200 and is the 572B the correct output tube (are there
> any substitutes? recommendations?)?  Comments on the linear would be
> appreciated.
>
> Finally, for the SB series: what is the recommended paint to use for
> repainting and is there any difference between applying this to a newly
> finished surface versus the old (but cleaned) surface?
>
> 73 to all,
>
> Doug
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --