HW-101 question

[ray mack]

Sandy:
        The filter in my HW-101 is marked 404-284-1.  It is also
marked as 400 Hz wide Zin-Zout 2K Ohms.  Of course I have no manual
and I don't have it working so  can't be sure mine is right either,
but I believe mine is stock.  Is your filter marked with anything
besides the part number?

        BTW.  Thanks for the advice on the glowbug rig.  I had
considered using a 5763 to drive the 4-125's, but I wasn't sure it
would be enough on 40 and 80.  The 2E26 is also a good idea.  Do you
think the 5763 will have enough gas?  I have plenty of them but only 2
ea 2E26.

Ray
WD5IFS

______________________________ Reply Separator _________________________________
Subject: HW-101 question
Author:  Sandy W5TVW <ebjr at WORLDNET.ATT.NET> at mails
Date:    8/6/98 9:45 PM


Hello lovers of the green,

        I have a Heath CW filter, part nr. 404-548.  Is this the correct
filter for
the HW-101 for CW?  It seems to work OK receiving, but there is a terribly
large drop in RF drive for the transmitter when its selected.  I can
compensate on some bands, but cannot on others, especially 40 meters.
        Is this the right filter or maybe I have a bad one?

73,
Sandy W5TVW

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --