SB 1000 Resistors

[David Humbertson]

Hello Mac,
I believe you are talking about the resistors that are wired in series with the
AC primary power relay K2 when wired for 240 vac. You cut the wire if you are
using 240 and leave it in when using 120. Page 38 in the manual and
detail 6-2 b and d. The schematic shows it just as well. You will burn
the relay coil out if the 2 resistors are not in series with the coil when
operating from 240.

Let me know if this was what you were referring to.

73,  Dave - W3NP
Ft. Ashby, WV

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --