Heath GH-17 Soldering Iron

[Multi-Volti Devices]

Maybe I'm wrong, but I remember the threads looking alot bigger than 1/4-20,
but I'm thinking of the model with the perforated cover, and the tips that
had the integral heating element.

Murray

Ed Mosher wrote:

> Fellow Greenies,
>
> Here's the specs for the iron tips that have been a recent thread:
>
> There were three tips available.  They were all  6V,  25W (nominal) and
> had either a 3/16" chisel, 3/16" pyramid or 1/4" chisel tip.  The iron
> itself had three output levels of  4.5V, 5.5V or 6.5V for Low, Med or HI
> temp.  The tips have a 1/4" x 20 thread as I recall, and I will verify
> that if necessary.  There is a chance that someone monitoring the list
> can make new tips!  Stand by for more on this.  Either he or I will post
> info when available.
>
> Ed Mosher
> WA8ZVO at JUNO.COM         Formerly  "One of the Hams at Heath"
> St. Joseph (On Beautiful Lake Michigan), MI
>     "Corporations make decisions based on dollars, not SENSE!"
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --