Heath Q-mult with KWM-2(A)

[JOSE V. GAVILA (EB5AGV/EC5AAU)]

Hi gang!

Here I am again with another question ;-)!

I would like to take advantage of the two Heathkit Q-multipliers I have in
my shack: one is the famous QF-1 and the other one a GD-125. BTW, I need a
manual for the GD-125, as I have only an scanned schematic of it. I've been
working today on the GD-125: after a bunch (10+) of cold joints corrected,
charred wires changed, a potentiometer replaced and a dirty variable
capacitor cleaned, the DC voltages are just as the schematics suggest.
Well, now I need the alignment information of the unit, to get it to specs.

At the moment, main interest is to hookup the GD-125 Q-multiplier to a
Collins KWM-2A. I would like to know basic things, as which wire to use
(kind and length, if this is important) and if I should do any mod to the
KWM-2A or the GD-125 to 'match' them. Any information would be most welcomed!.

Thanks!

Best regards.

JOSE
--------------------------------------------------------
  73 EB5AGV / EC5AAU
     JOSE V. GAVILA
     Ausias March 46, 15
     46910 Benetusser - VALENCIA
     SPAIN

** VISIT MY VINTAGE RADIO SITE - updated 18-August-1998 ***
  http://www.geocities.com/SiliconValley/6992/
  e-mail: eb5agv at ctv.es & eb5agv at amsat.org

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --