Broken Toroids

[Robert S. Capon]

Thank you to all who responded to my plea for help.  About ten people wrote
back, so I'm sending a summary note to thank everyone.

The consensus is that the broken toroid will tend to work satisfactorily at
low power, but may be very problematic at high power.  Since I run up to a
killowatt with the SB-1000, I'll replace the toroids.

The verdict is that the measurements are indeed for the T-200 toroid, and the
red color is the -2 version of the toroid.  The -2 is also in the frequency
range of 500 Khz to 30 Mhz.

Many people wrote with various sources for parts.  I found an excellent
resource on the web who sells Amidon toroids in small quantity.  The Toroids
cost $4.50 each.   Their link is as follows:

http://www.bytemark.com/amidon/pripcore.html

To everyone who wrote to me, thank you again.

73,

Rob, W3DX

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --