HP-23 caps needed

[William J. Graham]

I used United Chem-con part number 82da101m500jd2d 100uf 500 WVDC
snap in mount caps that I got from Newark Electronics. They are on page 321
ofthe4 catalog that I have and were $4.50 when I bought them.
U used clamps that I bought from Antique Electronic supply .

Tese caps are about an inch in diameters and fit real well. TYhey are shorter

than the ones Heath used and tolerance is +- 20%.
they also have a 220uf version and a 47 uf version.

Bill

N5LMX

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --