Help on SB640/SB301/SB101

[Stewart Lyon]

Hi Gang;
I posted the following in the December reflector and did not get a
responce.  Maybe everybody was too busy with Christmas shopping!!
Anyway, I'm going to try it again. I would really like to get this info
without buying the manuals. Thanks.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I'm trying to connect a LMO to my SB101 without the aid of a manual.  Is
there someone out there who has a SB640 manual and can provide the pages
that deal with connecting the SB640 to the SB101?? I can send an SASE or
will respond to an email with my mailing address.

The LMO I'm using is actually the output port of a SB301 receiver that
supposed to go to a SB401.  I've got it to work pretty well by lifting
the coax that goes to the xtal oscillator inside the SB101and connecting
the coax (through a capacitor) to a line coming from the SB301 LMO. This
works in the "Locked Aux" but not in the "Unlocked Aux" position.
Somehow they must have used the xtal oscillator as a switchable follower
but I can't get it to work.

Thanks in advance for your help.
+++++++++++++++++++++++++++++++++++++++++++++++++
73,
Stu Lyon, W6CUX
Winnetka, CA
-ARRL Life Member

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --