HW 101 Problem

[Jordan Arndt]

David Rice wrote:
>
> I have a HW 101 in excelent condition with one problem.
> The manual says that there should be 50ma of resting current when meter is
> set on plate. I fallowed directions for the bias adjustment,but get no
> response on the meter.     The meter works in the other positions. I am new
> at working on these rigs and wonder if someone can point me in the right
> direction to start solving this problem? I also show about 75 watts output
> into a dummy load.
> Thanks and 73        Dave  W6NUC..........
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
Hi Dave are you keying the transmitter in SSB mode to make the Bias
adjustment??? Key it with NO AUDIO or turn the Mic gain to zero then
adjust the bias pot for 50 ma.... 73 de Jordan VE2SWL/VE6...

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --