Monitor xfmr

[Paul K. Dean]

Hi, Folks!

I am quite interested in this subject as well and have been following this
thread.  My interest happens not to be Heath related, but perhaps some day
could be.  One of my "other" hobbies is antique broadcast sets.  As any of
you that share this affliction knows, audio interstage transformers tend to
be a big problem in equipment from the 20s and 30s.  I have 2 units now
that I'd like to get rewound.  Yes, you can buy these modern little
replacements and sometimes fit them inside the old core.  Still, I'd really
like to find someone to rebuild the original unit.

Any ideas would be appreciated!

73,
Paul, wb9hgz


At 08:41 PM 7/1/98 -0500, you wrote:
>Contact with Tom Hand in GA. for assist in obtaining a
>transformer for the Heath Monitor  was a no go.. Tom works on
>BIG stuff. So request out again for a used working HO 10
>monitor scope or a power transformer for it. If this isn't in
>the works then I guess I will have to build an outboard supply
>unit- with one or more transformers. It has two 5 volt
>secondaries, a 210/220  ac to provide  LV DC and a secondary HV
>1200 V and a tap to give about 625.. Have the low voltage units
>and can contrive the 210 V  but the 1200 volt is a sticker  The
>DC conversion is with diodes - no problem here  Any comments
>-suggestions or whatever solicited..
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --