SB-102 with Lo-Pass filter

[R. L. Blaney]

TNX, Terry,
Very good point, that is the only place it can be effective.  My filters
are, of course, 50 ohm in & out, so thats where they go.  I guess I only
took too much for granted. TNX agn, 73 es gud hamming, de
Dick, WB8MHE
wb8mhe at bright.net

-----Original Message-----
From: Terry Dobler <kj7f at MICRON.NET>
To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
Date: Wednesday, July 15, 1998 9:13 PM
Subject: Re: SB-102 with Lo-Pass filter


>Gang,
>
>   Another thought, a low pass filter will only work correctly
>if it is looking into a matched load.    I always place mine
>between transmitter and the tuner.   That way it always sees
>a 50 Ohm load.
>
>Terry KJ7F
>
>
>kj7f at micron.net  (Boise, Idaho)  http://netnow.micron.net/~kj7f
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --