vf-1 output?

[Steve Lords]

allen
 i checked the vf-1 output  with a scope and
in the 160-40 meter position the output averages about 10 volts rms
across the whole dial with about 25 volts rms in the middle
and tapers off to about 10 volts rms on the dial ends.
and on 40-10 also about 10 volts rms acoss the whole dial
this is all with no load...
thanks
steve
wa7isl :)

Allen & Matt wrote:

> Hi Steve and the Group!
>
> RF output voltage apparently approximately 10 volts on
> fundamentals. Whether p-p or rms isn't specified.
>
> You can checkout the specs on the Heathkit Virtual Museum.
> the url for the VF-1 page is
>
>  http://www.cyberventure.com/heathkit/ham/vf-1.html
>
> Have fun!
>
> Allen
> --
> 73 de Allen, KJ6XH, and Matt                  West Sacramento
>        mattall at ulink.net
>        http://www.ulink.net/~mattall

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --