SB-201 Amplifier idle current

[W7PDX]

Bill:
The transmitter needs to be keyed, but with the level control all the way
down, in order to see the 90mA of idling current in the amplifier.
73
Joel
W7PDX

>Date:    Fri, 27 Mar 1998 20:28:55 -0800
>From:    Bill Collins <bcollins at TERRAWORLD.NET>
>Subject: SB-201 Amplifier idle current
>
>I have a Heathkit SB-201 Amplifier.  In the manual it says on Page 46, =
>Operating procedure, "Place the meter switch of the linear amplifier in =
>the Plate position and push the OFF-ON switch to ON.  With no driver outp=
>ut from the exciter, the linear amplifier meter should show idling plate =
>current of approximately 90mA.  I don't get the indication at all on the =
>meter.

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --