HD-1250 problem

[Paul K. Dean]

I had the same problem and found that the household cleaner "Cinch" along
with some elbow grease took it off just fine.

Good luck!
Paul, wb9hgz

At 05:12 AM 11/2/98 -0500, holden wrote:
>Hello HEATHENS,
>Have a cosmetics problem with a HD-1250 solid-state dipper. It is in
>absolutely perfect condition except that the foam in the the carrying
>case lid has apparently deteriorated, and some foam residue is now
>smearing the top face of the dipper. Does anyone know of a way to remove
>
>this residue? Water doesn't do it, I am afraid it needs a solvent, which
>
>will probably take off the lettering. Any ideas?
>
>Also re the "nut starter" that ideas was copied by at least one company,
>
>I built two Knight kits back in the 60's , an R100A, and a small stereo
>amp, both of which had a red plastic "nut starter".
>
>Thanks, Howie WB2AWQ
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --