Wanted: Shielded cables

[Lawrence P Knapp]

     James -  Welcome to the amateur fraternity.  As a very long time user
     of a complete SB-104 setup, for more than 10 years, like you have, in
     fact I used the first and "original" proof-build SB-104, SB-634,
     SB-644, SB-230.....etc.  The interconnecting cables from the 104 to
     all the accessories are to be constructed by the owner.  The
     construction techniques, cable lengths, type of cable, cable
     connectors are listed in the manuals for the units.  I used some very
     small coax with RCA connectors for the connections from the SB-104 to
     the remote.  From the SB-104 to the speaker I used shielded audio
     cable, with a RCA connector.  From the HD-1410 I used (and still use)
     a old piece of RG-59U with a RCA jack; length just enough to reach
     from the front of the rig to the connector.  From the SB-104 to the
     SB-200 you should use RG-8X with a RCA from the SB-104 and a PL-259 to
     the SB-200.  Then from there (SB-200) it's all PL-259's using RG-8X.
     The manuals (hopefully you have them for all your stuff) should be
     able to lead you thru all this......Have fun; it was a great unit;
     worked over 200 countries with it (both SSB, CW and SSTV)....and
     welcome............Larry (KC8JX)

     "One of the X-Hams at Heath"


______________________________ Reply Separator _________________________________
Subject: Re: Wanted: Shielded cables
Author:  Keith Rowland <k4kgw at MINDSPRING.COM> at Internet
Date:    9/3/98 11:50 AM


Jim:  I believe one is expected to make up these cables one's self.  Keep
them as short as possible.  I am using RG-8X for all my interconnect RF
cabling with my two SB-104As and accessories.

73 and welcome to the fraternity!~

Keith

James G. LaGrone wrote:

> Good Morning,
>
> I am a new amateur. I am just putting my Heathkit station together. I
> have the SB-104a and all associated accessories. I am in need of the
> connecting cables for the SB-644a, SB-634, SB-614, HD-1410 and lastly an
> SB-200. I have the supply cable for my power supply. I thank you for
> your time.
>
> 73
>
> de
>
> Jim, KB9TCP
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --