Hw101

[Michael Diegel]

Hi List I need some help with my HW101.  I have no output power although
all tubes check okay.  The receiver also seems to be okay.  I've removed
the vfo to check it, but have run into problems in hooking it up.  I
carefully labelled three wires, but I had five.  When I bought the set a
RIT had been added and I forgot to label these two.  In my manual
pictorial 8-14 shows the bias b+ and fil wires plus the output.  The two
wires from the RIT are to be soldered into position.  Any suggestions?

Michael
VE3PSD/VE5WD

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --