Questions abt HW-101 meter

[Stewart D Lyon]

Hi Gang,

I recently acquired a HW-101 with  very ruff manual. The pages about
"reading the meter" were missing. In lieu of the manual, I would like
answers to the following questions:

1) The meter seems to be a S-meter (like the SB-301) rather than a
transceiver meter (like the SB-100). Is this normal??

2) If yes, what s-meter value corresponds to full load Ip (250 mA)?? Does
the little tick mark equal the 50 mA?

3) What s-meter value corresponds to max ALC range?

4) I have a SB-100 meter as well as a fully operating SB-101. Should I
replace the HW meter scale with one from the SB-100 and read it like I
would the SB-101??

If the past is any indicator, I'm going to have a lot of people to thank.

Anyway, thanks in advance.
73, Stu - W6CUX
Winnetka, CA
ARRL Life Member

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --