Help with a Heathkit HM-2140 Meter

[George Gleim]

Hello Green Guys!

Well, I recently purchased a HM-2140 described by the owner as mint and
unmodified only to find that it reads about 30 percent low and the long
cable to the remote sensor unit was cut down to about 3 inches.  Can
someone say "Caveot Emptor?"  Oh, Well, those are the breaks...

Anyway, might anyone out there know where I can acquire a length of
cable that is used to connect the remote sensor housing?  It contains 5
wires and I really only want a 1-2 feet in length.

Also, if anyone has any ideas/reasons for the low power measurements,
love to hear them.  I did perform the alignment procedure as specified
in the manual and was able to complete the procedures.  It is O.K. up to

about 70 watts and doesn't read higher regardless of the power.

Thanks in advance for any help!

Very best regards,

George

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --