SB620 to SB303

[Dick Blaney]

Hi Steve,
Go to Dave Wentz's page, open "Heath Service Bulletins ASCII", open "SB-303"
and about the second bulletin will give you the answer.
http://members.accessus.net/~dwentz/kb9jja/heathkit/
Hope it helps.
73 de
Dick, WB8MHE
wb8mhe at bright.net

-----Original Message-----
From: Steve Van Houweling <stevevho at NETINS.NET>
To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
Date: Wednesday, April 14, 1999 12:23 AM
Subject: SB620 to SB303


>I have a SB303 receiver and SB620 Scanalyzer and just wonder where to tap
into the 303 for
>the IF input along with what value cap to use.  Any help would be
appreciated.   73's  Steve, WB0UGO
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --