SB-102 antenna conections

[Ed Richards]

Don't do it! you will destroy the value of it being Stock and Origional!
Ed


On Mon, 26 Apr 1999 19:53:36 -0400 Steve and Anne Ray
<sbralr at WORLDNET.ATT.NET> writes:
>I recommend you replace it with a SO-239.   This avoids murphy from
>having
>you plug in a speaker or something else into the RF output.  See my
>article
>on mods for the HW-101/SB-100 series on KB9JJA page.
>
>http://members.accessus.net/~dwentz/kb9jja/heathkit/
>
>My contribution to Dale's excellent page is under Mods called HW-101
>Mod
>Collection by Steve Ray K4JPN  Practically all the mods are applicable
>to
>the SB-100 series also.
>
>Addition of a SO-239 connector at the antenna output. There are
>several ways
>to do this. (1) I used a standard SO-239 in place of the phone jack.
>Use a
>sheet metal ream to enlarge the hole, then decide if you want to mount
>the
>flange inside or outside of the chassis. If outside, simply drill
>mounting
>holes and remount the ground going from relay RL1 to one of the
>mounting
>screws. If you desire to have the flange on the SO-239 inside the
>chassis,
>simply file down one side of the flange till it clears the bracket of
>the
>final switch shield. Then drill your screw holes and reconnect the
>ground
>from RL1. (2) Another method is to use an 83-875 1002 coaxial
>connector.
>This is a single hole SO-239. Don t forget to ground relay RL1 on a
>convenient ground. This can be the screws in the hole at the shield at
>the
>back of the chassis.
>
>Steve Ray K4JPN ex K1VKW HW-101, HW-8, SWL 30-40,
>Pixie II, NC 38S, OHR 100A 30 M and Heath Kit fan
>Warner Robins, Georgia
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --