6883 tubes again!

Jerry Kitterman jerry at OTHERSIDE.COM
Tue Aug 17 22:43:10 EDT 1999


Gang,

Thanks very much to everyone who helped and corrected me on the 6883 tubes.

As it turns out, the filaments WERE at 6.3V after all.  About 50 watts or
so output.  Guess those tubes were all he had to replace with or ??

Anyway, put in two good 6146's and bingo, 100 watts out!!

So, I learned another lesson and did not have any problems after all.
Thank's guys!

73
Jerry.....W9CTB

Now to neutralize those tubes and re-align the whole rig.

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"




More information about the Heath mailing list