reforming caps

[charles w. morehouse]

Ken,
Have had great results by cutting off the base of tab mounts with my
Dremmel tool. You then clean them out and replace with the new smaller
radial caps. Epoxy the can together. As a restorer and purist this keeps
the unit original. Yes those new ones are too pricey. Luck 73.
Wayne;
W4GBW

Ken Ketner wrote:
>
> Bruce and others:
>
> Thanks for info about reforming caps. I have been able to find axial
> caps of new manufacture of any voltage up to 450 wvdc through antique
> electronic supply (I have no interest in the company) in Tempe AZ for a
> buck or 2.
>         I have a Sprague cap analyzer in my shop which has an eye tube and a
> bridge for determining value, a voltmeter and an ammeter built in, as
> well a provision for putting up to 600 volts (variable) onto a cap. One
> can watch the meter and see what the leakage current is. When I clip a
> lead on an el cap and slap the Sprague on it, I find that no matter how
> long I keep the voltage on most old caps, they still will come down to
> leak around 3-10 milliamps, which is too much it seems to me. A cap will
> settle down after 3 or 4 minutes on voltage, but almost never at an
> acceptable leakage value. SO I have always thought that clipping in a
> recently manufactured one from Antique el sp is the way to go. That
> means I won’t have top be back in that particular chassis for some time.
> I also routinely clip in interstage caps for the same reason. Am I
> missing some part of the forming procedure? Does one have to leave them
> on voltage for a week or a day or something?
>         On can caps, Antique offeres new manufacture on those too, but they are
> 20-30 dollars. So I get a tie strip, fix it to a bare spot on the
> chassis, and using new axial lead caps, rewire the can leads. Same
> effect for half or third of the money. And if one wants the can to stay
> there for esthetic reasons, that is fine.
>         We inquiring minds want to know
>
> Many thanks
> --
> Ken Ketner, KA5ELD
>         Postal Address:
>
>                 Institute for Studies in Pragmaticism
>                 Room 304A Main Library Building
>                 Texas Tech University
>                 Lubbock, TX 79409-0002
>
>         email:
>                 Office  b9oky at ttacs.ttu.edu
>                         Home    ketner at arisbeassociates.com
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"