Need DX60 help

[John Campbell]

Hi Bob....have you tried another crystal. It sort of sounds like sluggish
crystal action. Turning the drive control probably changes the oscillator
loading slightly, which is allowing it to start when you re-key.
                       73.....John   <<w8jnc>>

>From: Bob Ensminger <bens at VALINT.NET>
>Reply-To: bens at valint.net
>To: HEATH at LISTSERV.TEMPE.GOV
>Subject: Need DX60 help
>Date: Wed, 22 Dec 1999 10:11:23 -0800
>
>I have a DX60 (not A or B) and I got it going basicly and seems to work ok
>except. I use a 40 meter crystal (7050) and load xmtr up ok, but when go to
>key it agn, it doesn't seem to oscillate unless I start twisting the drive
>tune knob quite a ways.  What should I look for?  I also have a Knight V44
>VFO(I believe that is the model #) that I would like to team up with it and
>stabilize some.  Would appreciate some advise.  I also don't have manuals
>for either.
>Wouldn't mind finding them.
>
>Thanks and Merry Christmas to all,
>73, Bob
>KQ7J
>
>Sponsored by the City of Tempe
>
>Listserver Submissions:  heath at listserv.tempe.gov
>Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath
>'name' 'call'"
>Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"