T1 Xformer/slug

[Ray A. Allen, Sr.]

Thanks to all who replied on the methods of removing the
tight slug.
        Bob opined that it was split, not really tight...
He was right,,,split in half I guess and the pressure to turn it expands
it more..
Steve offered a lengthy plan to repair, basically chip away at the slug
carefully and once out, clean the form and re-insert new slug..

I removed the xformer for the rig, quite easy actually, so it's on the
bench...next operation is to remove the slug..or try..

And I have an offer for a new (used) 52-79 can...so I'm in business

Many thanks to all who replied, there were quite a few...

es 73 Ray
--
******************************
Ray A. Allen, Sr., W2KBR/3
8303 Grainfield Rd.,
Severn, Maryland, 21144-2331
******************************

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --