SB102/R202

[Ray A. Allen, Sr.]

Steve and Group:
        OK I will surely replace R202.  During the discussion Steve
mentioned the R941 resistor in the LMO P/S.  It is spec'd at
68k.  I pulled the P/S to check the 2 resistors in question, the other
being R939 at 47k.
        R941 68k metered out at 105k, and R939 metered at 55k...
My thanks to Steve for clarification of the R202 in SB102, and the hint
about the LMO P/S resistors.....
        When I get the new resistors purchased and soldered back in,
I'll provide status rpt on Low output SB102..by the way, as Steve also
indicated, the Receive side of this SB102 is super....

es 73 Ray
--
******************************
Ray A. Allen, Sr., W2KBR/3
8303 Grainfield Rd.,
Severn, Maryland, 21144-2331
******************************

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --