V10 and V11

[Russ Hines]

Hi Sean:

If it's used as an oscillator, you might as well keep the 6AU6.  For
amplifier service, the 6HS6 will give you a little more gain.  This worked
quite well in my HW-100.

73,
WB8ZCC

MooWare wrote:
>
> Greenies
>
> Just curious.    I've seen a post on the list here about switching V10
> and V11 "TO" 6HS6's "from" 6AU6's. on the HW101.   Looking at my 101 I
> see that 6HS6's are in place and even printed on the board at those
> locations.
>
> Now looking at the mod list by K4JPN on the KB9JJA web page he states to
> change "from" the 6HS6 "to" the 6AU6 or 6HSo's
>
> I was just curious which is the correct one?
>
> Also, anyone tried replacing R202 for better RF Drive? or changing R113
> to 4700 for better IF response?
>
> Sean
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --