SB-200?

[Russ Hines]

Hi Roy:

This amp uses (2) 572B's (if my memory still works)... you should get about
600 watts output.  Maybe more if you push 'em (don't).  If your tubes are
used, 550 on 80m is not bad, and it will roll off some the higher up you go
in frequency.


Roy M Hawkins wrote:
>
> Hi keppers of the green,
>
> I just bought a SB-200, and am wondering what the normal output should
> be?
> I get 550w on 80m and 450w on 10m into a Waters dummy load running on
> 120vac. with 100w drive.
>
> 73 Roy  WA9KEC  EN52
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --