HO-10 Monitor Scope

[Stewart Lyon]

Don,

Read Dave Wood's (W4EJ) posting on that very subject on Jan 13, 99. He
suggest All Electronics in Van Nuys, CA. ( www.allcorp.com )  Their
retail store had 0.33 uF and 0.1 uF at 2000V.  The .33 is 1.88 L x  .75
dia and the .1 is same length and .5 dia. Using these, I was able to
re-cap a SB-610 & a -620.

73, Stu - W6CUX
Winnetka, CA
ARRL Life Member

On Sat, 30 Jan 1999 18:57:05 -0500 DonaldF F Christensen
<dfcsenior at JUNO.COM> writes:
>C-31 in my HO-10 has gone bad. C-31 is a 0.15 mfd @ 1600 volts. The
>closest I could come in my junk box was 0.047 @ 1600 volts. I wonder
>if the 0.015 could be a
>replacement for the 0.15 or is it too small? Any one know where I can
>find a new 0.15 @ 1600 volt tubular capacitor? Thanks for listening. 73
Don W8WOJ

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --