[HeathKit] Needed: SB-301 frequency dial

[Frank Losee]

You can also use Brasso for the rough polishing and then use toothpaste
and water for the final polish.

Frank

Ed Richards wrote:
>
> Carl;
> I don't have a dial, but don't give up on yours. I have saved some pretty
> bad messes by the following method:
> 1. Sand area with #400 wet sandpaper.
> 2. Polish with rough polishing compound (Pep Boys-red can).
> 3. Polish with fine polishing compound (Pep Boys green can).
> 4. Finish off with jeweler's rouge in oil, if necessary.
>
> Usually step 3 is enough.
> Regards,
> Ed Richards
>
>

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"