SB-110A - Low xmt audio problem

[Ray A. Allen, Sr.]

Guy,
 IMHO, the 110A that ".... had just come back from RTO prior...."
which you then fed into the cantenna and only got 50-60 watts out..
RTO usually places a label or a date on the rigs after they work on
them and if that 110A was short of 100 watts out by more than...
say 15-20 watts, something is wrong.....that radio is rated at
180 watts INPUT on SSB and clearly shud be close to 100 out.....
I had a SB110A that was measured at 90/95 watts output consistantly...

Check for an RTO label and find out exactly when that radio was serviced
if none can be found...well, I'd start doing some checking cause the
radio shud be better than 50/60 watts....

Good Luck
es 73 Ray

--
***********************************
Ray A. Allen, Sr., W2KBR/3, FM19qc
8303 Grainfield Rd., Severn,
Anne Arundel County, MD, 21144-2331
***********************************

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"