Looking for Mr. Glo-Bar

[Shadow]

I hope this helps
GC \General Cement\ Made them. I used them in Tube and / SS TV sets.
If you can find a parts house that sell to TV repair parts. You may be able to find them.
Gary
======================

Steve Stearns wrote:

> I need to find a part that Heath used in series with vacuum tube and pilot lamp circuits.  It is a power resistor called a "glo-bar" whose resistance changes from a high value to a low value as it gets hot.  The purpose of this device is to limit the startup current in the filaments to prolong tube life.
>
> I need a glo-bar rated at 880-100 ohms for a GR-91.  The power rating is not given, but looks like a 5 to 10 watt unit.  Does anyone know a source for this part?
>
> -  Steve Stearns
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe HEATH yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff HEATH
> Archives for HEATH: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --