Transceive cables for SB series

[Jim Conners]

ARCNET Lans use RG-62
jim

On Tue, 16 Mar 1999 06:17:10 -0600 "CHRISTOPHER W. (Chris) BOONE"
<Cboone at EARTHLINK.NET> writes:
>RG62 is used in IBM 3270 Mainframe and some other FEW data
>networks...Ethernet LANs that run THICK ethernet uses 50ohm coax
>such as RG58 or RG8 (a spiked tap scores through to the center
>conductor and makes the connection...in other words, DONT use
>coax from a LAN...it has holes all thru it and is not rated for
>VHF work anyway..)
>I used RG62 at my former job working in Telecom.....any good
>coax dealer should have some...or contact any IBM mainframe
>service or dealer...they may have some short pieces lying around.
>(But I used RG58 on my 401/303 successfully...I THINK the
>difference in capacitance may make a slight difference in loading
>on the LMOs)
>
>Chris
>WB5ITT
>
>Multi-Volti Devices wrote:
>>
>> I THINK RG-62 is 93 ohms. I also THINK some of the data coax cables
>used for
>> LAN's, Ethernet, whatever it's called, are 93 ohms.
>>
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --