HW101

[WB2TBB]

Filter switch does not move very much. Is it frozen solid?
Connector on back might be for the external VFO.
...Dave
    -----Original Message-----
    From: Edward Strungis <ed.strungis at WORLDNET.ATT.NET>
    To: HEATH at LISTSERV.TEMPE.GOV <HEATH at LISTSERV.TEMPE.GOV>
    Date: Tuesday, March 30, 1999 7:37 PM
    Subject: HW101
    
    
    I am a newbie to both radio and heath. Just bought a HW101 with power supply. On the RF gain control there is a SSB/CW filter switch that seems to be frozen. I did'nt want to force it. I don't have a manual yet. Anyone have any suggestions? Also when I received I found a small 9 pin plastic connector that does not seem to be attached to anything (The connecting wires were cut back) It seems to fit in a small cutout dead center on the back. Any info would be greatly appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/19990330/f0c3df32/attachment.html>