SB401 Question

[Mike Souhrada]

Dan Pividal N4VET wrote:
>
> I have an SB401.The function switch turns the unit on and off without a
> problem.
> When I switch to the other positions I feel no click between them and the
> switch feels like sandpaper. I have tried to spray the switch and it gets
> smooth while the spray is wet but then gets raspy again.
> Although I feel no definite stops the function switch seems to be working
> electronically well.
> Any tips to fix this problem short of replacing the switch which could be a
> bear to take out and probably very hard to find?
> Thanks,
> Dan N4VET
>
Dan
Lube the detent just infront of the on/off switch with lithium (white)
grease.
Mike
Le Claire, Ia

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --