SB102 problem on 20 meters

[John Campbell]

Check the alignment of the twenty meter circuits. Sounds like the thing
might be taking off on a harmonic or spurious oscillation instead of the
desired band. You may also want to verify that the neutralization is
correct. If this dosen't solve the problem, double check the wiring of the
band switch in the twenty meter position.

                                    73....John <w8jnc>


>From: ", Bob Ensminger" <bens at VALINT.NET>
>Reply-To: bens at valint.net
>To: HEATH at LISTSERV.TEMPE.GOV
>Subject: SB102 problem on 20 meters
>Date: Sun, 16 May 1999 14:23:30 -0700
>
>I just finished many hours cleaning, fixing, lubricating, cap replacements
>etc..  Everything works great except on 20 meters.  When tuning up, the
>final tune is very sharp and drops off sharply to zero power on either side
>of peak power.  Also there is no dip on plate current.  I aligned
>everything. Does anyone have suggestions where I should start looking??
>Thanks for help
>Bob, KQ7J
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe HEATH yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff HEATH
>Archives for HEATH: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --


_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe HEATH yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff HEATH
Archives for HEATH: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --