8 pin OCTAL PLUG

[Ed Kowalski]

These were very common items, made by Amphenol. Try the hamfest parts
bins.  Ed  K3PRE

Mark V. Johnson VE3DJU wrote:
>
> Hello all:
>
> I'm looking for an 8 pin Octal plug and cover that is used on the Heath
> HG-10 VFO. This plug connects to an HW-16 or DX-60 to provide the power. If
> I recall correctly, this same plug and cover was used on the HP-23 pwr
> supplies as well. Anyone help me as to where I might find one??
>
> I know I could break up an 8 pin OCTAL tube and use the base, but a proper
> plug and cover is the preferred solution.
> TNX
>
> Sponsored by the City of Tempe
>
> Listserver Submissions:  heath at listserv.tempe.gov
> Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
> Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Sponsored by the City of Tempe 

Listserver Submissions:  heath at listserv.tempe.gov
Listserver Subscription: listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"